I thought I still had some interior paint left over, but it had gone bad in the can. I called yesterday and had to have a quart overnighted to me. It came today, so I wrapped up the painting. Here’s the inside of the cabin where the sidewall will be visible behind the interior panel.
Here’s a bunch of the smaller parts with final paint. I might end up having to reshoot the roll bar support channel cover since I think some dust settled on it.
Here’s the canopy frame. The red stripe along the arch is some electrical tape that is masking off where the Sikaflex primer will go.
Here are the roll bar and support channel.
I also mixed up some epoxy and skim coated the final parts of the empennage. Here’s the rudder bottom fairing.
And here’s the top of the vertical stabilizer.
