Trimmed Flanges and Applied Filler

I trimmed the flanges so that there is only 1/4″ of underlap on the aft half of the fairing.

You can see in this picture and the one above that the aft intersection fairing doesn’t extend far enough forward in some spots.  I’ll take care of that with some filler.

I applied a couple of layers of electrical tape to the aft edge of the forward half of the wheel pant and then installed everything to lock it into position.

I mixed up some lightweight filler with flox for strength and filled in the low spots.

I squeezed some into the gap on the underside since the gap was uneven.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.