Work on Right Elevator

I only had a few minutes tonight, but I needed to take care of a bit of filler on the right elevator before laying up the glass over the joint.  The trailing edge of the tip fairing didn’t go all the way back to the trailing edge of the elevator skin, so I mixed up some epoxy/flox and filled in the gap.

On the leading edge, the countersink weight didn’t align with the leading edge skin, so I applied some of the filler here to build it out.  I’ll file this flush when it cures.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.