I’ve been absolutely swamped at work, so I’ve had very little time for the project. Unfortunately, this is not going to improve anytime soon. I did get a few new hoses from Brett at Bonaco, so I wanted to install them and see if this fixed my brake leak. I installed the new brake lines and bled the system using the new brake bleeding system I picked up from Aircraft Tool Supply. I pressurized the system and applied the parking brake. As far as I can tell, the brake leak is fixed.
I also replaced the upper oil cooler hose. The previous one I received from Bonaco had a problem that caused the hose to get twisted when I tightened it down. Brett sent me a new hose for free, so I put that on and torqued everything down.