Fit Hinge Pin Covers

I cut the openings in the sides of the cowl for the hinge pin covers and then taped them in place.  I taped a piece of scrap aluminum over the opening to help position the cover.

Next, I laid up about 1/8″ thick of fiberglass over the inside of the cover, tying the top and bottom cowl halves together.  The back and sides of the cover are waxed to prevent the epoxy from sticking.  I’ll cut the cowl halves apart after this cures.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.