With the snorkel painted, I installed it permanently.
I took the plastic off of the filter and installed it for good as well. Since I’m still a few months away from the first engine start, I’m going to cover this to keep dirt and metal shavings out.
I torqued and safety wired the bolts that hold the snorkel to the throttle body. The kit specifies lock washers here, but I feel more comfortable with safety wired bolts.
I didn’t get a picture of it before installing the snorkel, but I also installed the starter cable. I’ve disabled the starter for now and won’t re-enable it until just before first engine start.
