I wrapped up the flap position sensor installation tonight. I installed the 4-40 threaded rod between the bracket I fabricated and the position sensor and adjusted the length so that it moves the position sensor arm through the full range of travel. I then installed a couple of locking jam nuts to keep the rod from moving.
Next, I configured the flaps with a couple of intermediate stop points. I’ll duplicate these settings in the VP-X so that it will automatically stop at these points when I tap the flaps switch. I probably won’t enable that feature during initial flight testing though. Here’s the indication when the flaps are all the way up.
…and here’s the indication when the flaps are all the way down.
