I finished installing the aft seat pans. These aren’t primed like the baggage floors because these will get painted with a paint that matches the carpet color since part of these may be seen around the edges of the carpet.
I got my Dynon SkyView 10″ screen and associated extras (ADAHRS, backup battery, EMS and probes, GPS antenna, etc.). I hooked up the appropriate power and ground pins in the D-Sub 37 pin connector as well as the ADAHRS and backup battery, and powered it on. After a quick configuration, I had the attitude display up and running. There is no synthetic vision yet because the GPS isn’t hooked up so it doesn’t have a position fix, but it was cool to play around with moving the ADAHRS and watching the display change. The screen refresh rate is quite high, so the movement is very fluid.
