Pitot/AOA Tube Routing

I used some self-fusing silicone tape to keep the two fittings on the pitot tube from rubbing against each other or the inside of the pitot tube mount.

I also used a MS21919-DG10 clamp to route the tubes towards the spar so that they don’t interfere with the aileron push tube.  The DG10 has enough free play that I can slide the tubing through it if I ever need to take the pitot out.  I’ll have quick disconnects in the wing roots that I can disconnect to create the slack to do this.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.