{"id":813,"date":"2011-04-18T17:07:56","date_gmt":"2011-04-18T17:07:56","guid":{"rendered":""},"modified":"2017-12-08T06:08:19","modified_gmt":"2017-12-08T06:08:19","slug":"installed-cable-to-roll-servo","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2011\/04\/18\/installed-cable-to-roll-servo\/","title":{"rendered":"Installed Cable to Roll Servo"},"content":{"rendered":"

I fabricated and installed the cable to the roll servo in the right wing and hooked it up under the pilot’s seat.<\/p>\n

<\/a><\/center><\/p>\n

I ran the wire under the passenger seat and coiled the wire in the outboard bay. \u00a0I’ll drill the hole and then pull this out to the servo when the wings are attached permanently (or add a connector in the wing root; I haven’t decided). \u00a0I previously ran some servo wire in the wing that I bought from SteinAir, but I’m going to swap that out for the harness wire I purchased from Dynon. \u00a0I’d like to keep all network wires the same color throughout the aircraft so that it’s easier to maintain things down the road.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

I fabricated and installed the cable to the roll servo in the right wing and hooked it up under the pilot’s seat. I ran the wire under the passenger seat and coiled the wire in the outboard bay. \u00a0I’ll drill the hole and then pull this out to the servo when the wings are attached … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[8],"tags":[],"class_list":["post-813","post","type-post","status-publish","format-standard","hentry","category-avionics"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/813","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=813"}],"version-history":[{"count":2,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/813\/revisions"}],"predecessor-version":[{"id":3122,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/813\/revisions\/3122"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=813"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=813"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=813"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}