{"id":707,"date":"2011-10-23T17:04:29","date_gmt":"2011-10-23T17:04:29","guid":{"rendered":""},"modified":"2017-12-10T16:52:52","modified_gmt":"2017-12-10T16:52:52","slug":"installed-left-seat-heaters-fi","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2011\/10\/23\/installed-left-seat-heaters-fi\/","title":{"rendered":"Installed Left Seat Heaters, Finished Glare Shield Lights, Installed Vent Ducts"},"content":{"rendered":"<p>I finished running the wires for the left seat heaters. \u00a0I had to pull the pushrod back so that I could install a few zip-tie bases to anchor the wires to the seat rib.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20111023\/IMG_9859.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/IMG_9859.jpg\" \/><\/a><\/center><\/p>\n<p>I drilled a hole for the glare shield wire bundle and installed a rubber grommet. \u00a0I installed another zip-tie base to secure the wire next to the fuel sender and installed the rest of the wires to the dimmer and panel ground block.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20111023\/IMG_9860.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/IMG_9860.jpg\" \/><\/a><\/center><\/p>\n<p>I meant to install the vent ducts earlier to ensure that nothing interferes. \u00a0Unfortunately, I ran the pilot&#8217;s side headset wires right through the duct path. \u00a0They&#8217;re not long enough to route over the duct, so I&#8217;ll have to route them under it. \u00a0It&#8217;s not that big a deal, but you should install these as soon as the panel goes in to avoid running into any interference later. \u00a0Most things have some flexibility about how they&#8217;re routed, but these can pretty much only run here.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20111023\/IMG_9861.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/IMG_9861.jpg\" \/><\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"<p>I finished running the wires for the left seat heaters. \u00a0I had to pull the pushrod back so that I could install a few zip-tie bases to anchor the wires to the seat rib. I drilled a hole for the glare shield wire bundle and installed a rubber grommet. \u00a0I installed another zip-tie base to &hellip; <a href=\"http:\/\/jasonbeaver.com\/rv7\/2011\/10\/23\/installed-left-seat-heaters-fi\/\" class=\"excerpt-link\">Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[8,6],"tags":[],"class_list":["post-707","post","type-post","status-publish","format-standard","hentry","category-avionics","category-finishing"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/707","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=707"}],"version-history":[{"count":2,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/707\/revisions"}],"predecessor-version":[{"id":3259,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/707\/revisions\/3259"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=707"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=707"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=707"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}