{"id":700,"date":"2011-10-31T17:04:29","date_gmt":"2011-10-31T17:04:29","guid":{"rendered":""},"modified":"2017-12-10T17:04:33","modified_gmt":"2017-12-10T17:04:33","slug":"finished-fuselage-wiring-and-f","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2011\/10\/31\/finished-fuselage-wiring-and-f\/","title":{"rendered":"Finished Fuselage Wiring and Fabricated Flap Pushrods"},"content":{"rendered":"

I hooked up the canopy switch wires and verified the annunciator light illuminated appropriately.<\/p>\n

<\/a><\/center><\/p>\n

I attached the ground wire to one of the canopy latch pivot block mounting bolts on the back side of the bulkhead.<\/p>\n

<\/a><\/center><\/p>\n

I also installed a connector and some zip-tie bases in the roll bar support channel and hooked up the cabin light.<\/p>\n

<\/a><\/center><\/p>\n

Finally, in preparation for mounting the wings this Friday, I fabricated the flap pushrods. \u00a0I cut the tubes from some 5\/16″ stock with 0.058″ wall thickness and then drilled\/tapped the ends for the 1\/4″-28 bearings.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

I hooked up the canopy switch wires and verified the annunciator light illuminated appropriately. I attached the ground wire to one of the canopy latch pivot block mounting bolts on the back side of the bulkhead. I also installed a connector and some zip-tie bases in the roll bar support channel and hooked up the … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[8,5],"tags":[],"class_list":["post-700","post","type-post","status-publish","format-standard","hentry","category-avionics","category-fuselage"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/700","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=700"}],"version-history":[{"count":2,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/700\/revisions"}],"predecessor-version":[{"id":3270,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/700\/revisions\/3270"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=700"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=700"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=700"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}