{"id":165,"date":"2014-12-31T16:46:09","date_gmt":"2014-12-31T16:46:09","guid":{"rendered":""},"modified":"2017-12-14T06:28:47","modified_gmt":"2017-12-14T06:28:47","slug":"added-filler-around-lens","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2014\/12\/31\/added-filler-around-lens\/","title":{"rendered":"Added Filler Around Lens"},"content":{"rendered":"

I had previously cut the lens opening larger than necessary because I knew I would use filler to make them fit the lenses exactly. This is way easier than trying to trim the lenses or opening to fit exactly. I added a couple of layers of electrical tape around the lens to act as a release and then installed it on the wingtips. I mixed up some epoxy with microlight and squeegeed it into the joint.<\/p>\n

<\/a><\/center><\/p>\n

After the epoxy cured, I popped out the lenses and sanded the filler back so that it’s perfectly flush with the edge of the lens.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

I had previously cut the lens opening larger than necessary because I knew I would use filler to make them fit the lenses exactly. This is way easier than trying to trim the lenses or opening to fit exactly. I added a couple of layers of electrical tape around the lens to act as a … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[4],"tags":[],"class_list":["post-165","post","type-post","status-publish","format-standard","hentry","category-wings"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/165","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=165"}],"version-history":[{"count":2,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/165\/revisions"}],"predecessor-version":[{"id":3823,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/165\/revisions\/3823"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=165"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=165"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=165"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}