{"id":1281,"date":"2009-03-23T17:21:36","date_gmt":"2009-03-23T17:21:36","guid":{"rendered":""},"modified":"2017-12-14T18:54:28","modified_gmt":"2017-12-14T18:54:28","slug":"misc-elevator-work","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2009\/03\/23\/misc-elevator-work\/","title":{"rendered":"Misc Elevator Work"},"content":{"rendered":"

A few of the holes in the elevator spars have to be countersunk, but the spar flange is too close. \u00a0I took one of my extra countersink cages that I picked up on eBay and ground off part of the foot to allow it to get up close to the flange.<\/p>\n

<\/a><\/center>
\nI didn’t like the idea of routing the trim servo wires through the hole on the left since the servo shaft (which is threaded) extends through this hole in the full nose-up trim condition. \u00a0I’d much rather avoid the potential for chafing and drill another hole. \u00a0Since there was already a lightening hole in the elevator horn, I just drilled a 3\/8″ hole in the center of that. \u00a0I’ll put a snap bushing in that hole later.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

A few of the holes in the elevator spars have to be countersunk, but the spar flange is too close. \u00a0I took one of my extra countersink cages that I picked up on eBay and ground off part of the foot to allow it to get up close to the flange. I didn’t like the … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-1281","post","type-post","status-publish","format-standard","hentry","category-empennage"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1281","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=1281"}],"version-history":[{"count":3,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1281\/revisions"}],"predecessor-version":[{"id":3900,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1281\/revisions\/3900"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=1281"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=1281"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=1281"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}