{"id":1170,"date":"2009-09-24T17:18:14","date_gmt":"2009-09-24T17:18:14","guid":{"rendered":""},"modified":"2017-12-02T18:50:40","modified_gmt":"2017-12-02T18:50:40","slug":"miscellaneous-wing-tasks-1","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2009\/09\/24\/miscellaneous-wing-tasks-1\/","title":{"rendered":"Miscellaneous Wing Tasks"},"content":{"rendered":"

I started pulling the conduit through the wing ribs on the left wing, but it turns out that this makes a hell of a racket. \u00a0Since the kids were asleep, I put this off and moved on to something else.<\/p>\n

<\/a><\/center>I went ahead and squeezed the rivets on the right wing outboard leading edge. \u00a0I still have to rivet the ribs to the spar, but that has to wait until I have a riveting partner.<\/p>\n

<\/a><\/center>I deburred the edges of the flap brace and trimmed it to clear the rear spar doubler.jk<\/p>\n

<\/a><\/center>I clecoed on the flap brace (on the left) and the inboard aileron hinge bracket (center) and match drilled them.<\/p>\n

<\/a><\/center>I also clecoed and match drilled the outboard aileron hinge bracket.<\/p>\n

<\/a><\/center>After deburring and priming the mating surfaces, I riveted the aileron hinge brackets on (though only the rivets I could reach with a squeezer since it was late).<\/p>\n

<\/a><\/center>Here is the rear part of the outboard aileron bracket. Notice that the lower hole (right in this picture) needs a countersunk rivet. This is to clear the leading edge of the aileron since it comes very close to the bracket here.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

I started pulling the conduit through the wing ribs on the left wing, but it turns out that this makes a hell of a racket. \u00a0Since the kids were asleep, I put this off and moved on to something else. I went ahead and squeezed the rivets on the right wing outboard leading edge. \u00a0I … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[4],"tags":[],"class_list":["post-1170","post","type-post","status-publish","format-standard","hentry","category-wings"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1170","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=1170"}],"version-history":[{"count":3,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1170\/revisions"}],"predecessor-version":[{"id":2671,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1170\/revisions\/2671"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=1170"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=1170"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=1170"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}