{"id":1068,"date":"2010-01-20T17:14:49","date_gmt":"2010-01-20T17:14:49","guid":{"rendered":""},"modified":"2017-12-04T05:42:52","modified_gmt":"2017-12-04T05:42:52","slug":"drilled-center-floor-stiffener","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2010\/01\/20\/drilled-center-floor-stiffener\/","title":{"rendered":"Drilled Center Floor Stiffeners"},"content":{"rendered":"<p>I clecoed the bottom forward skin back on and pulled out the floor stiffeners. \u00a0Just like the side skin stiffeners, I had to use my hand squeezer and a couple of scrap pieces of angle to get these to sit flat on both the skin and the angle. \u00a0The forward ends of the two center stiffeners also needed small relief cuts to clear one of the firewall stiffeners.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20100121\/CIMG1066.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/CIMG1066.jpg\" \/><\/a><\/center><\/p>\n<p>After confirming sufficient edge distance on the skin holes, I match drilled the stiffeners to the skins.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20100121\/CIMG1067.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/CIMG1067.jpg\" \/><\/a><\/center><\/p>\n<p>Here is a shot of the inside. \u00a0The clamps holding these stiffeners to the beefy angle on the firewall and the cover support ribs on F-704 still need to be drilled. \u00a0That will tie all of these structures together quite firmly.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20100121\/CIMG1069.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/CIMG1069.jpg\" \/><\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"<p>I clecoed the bottom forward skin back on and pulled out the floor stiffeners. \u00a0Just like the side skin stiffeners, I had to use my hand squeezer and a couple of scrap pieces of angle to get these to sit flat on both the skin and the angle. \u00a0The forward ends of the two center &hellip; <a href=\"http:\/\/jasonbeaver.com\/rv7\/2010\/01\/20\/drilled-center-floor-stiffener\/\" class=\"excerpt-link\">Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[],"class_list":["post-1068","post","type-post","status-publish","format-standard","hentry","category-fuselage"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":2,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":2809,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1068\/revisions\/2809"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}