{"id":1028,"date":"2010-03-13T17:14:48","date_gmt":"2010-03-13T17:14:48","guid":{"rendered":""},"modified":"2017-12-14T06:40:49","modified_gmt":"2017-12-14T06:40:49","slug":"match-drilled-ahrs-mount-kit","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2010\/03\/13\/match-drilled-ahrs-mount-kit\/","title":{"rendered":"Match Drilled AHRS Mount Kit"},"content":{"rendered":"<p>I ordered the AHRS mounting kit from Van&#8217;s. \u00a0This is designed for the Grand Rapids EFIS or the Garmin G900X, but I&#8217;m going to adapt it for the Dynon Skyview ADAHRS. \u00a0I drilled out two rivets that tied the bottom skins to F-706 and F-707. \u00a0These will now additionally tie the rib pictured here. \u00a0I then ensured the ribs were parallel and match drilled the skin to the rib. \u00a0I then used the digital level to ensure the mounting plate was level laterally and match drilled it to the F-729A rib and F-707 bulkhead. \u00a0The mounting plate is tipped aft about 0.5\u00ba from the level of the longerons, but this is well within Dynon&#8217;s 1\u00ba limit. \u00a0I can always shim the ADAHRS unit if necessary.<\/p>\n<p>I&#8217;m still trying to decide how to mount the ADAHRS unit to the mounting plate. \u00a0Dynon calls for nonferrous fasteners, but I haven&#8217;t been able to find stainless steel or brass nutplates. \u00a0I can reach under the front edge of the mounting plate, but I&#8217;d kind of like to install the unit near the aft end of the plate in case I want to install another unit just in front of it.<\/p>\n<p><b>Update:<\/b> I ended up not installing the ADAHRS here because it is too close to the pitch servo and this can interfere with the magnetometer. \u00a0I decided to use this to mount the ELT instead.<\/p>\n<p><center><a href=\"http:\/\/www.jasonbeaver.com\/rv7\/rv7pictures\/Originals\/20100313\/CIMG1266.jpg\"><img decoding=\"async\" src=\"http:\/\/jasonbeaver.com\/rv7\/wp-content\/uploads\/2017\/11\/CIMG1266.jpg\" \/><\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"<p>I ordered the AHRS mounting kit from Van&#8217;s. \u00a0This is designed for the Grand Rapids EFIS or the Garmin G900X, but I&#8217;m going to adapt it for the Dynon Skyview ADAHRS. \u00a0I drilled out two rivets that tied the bottom skins to F-706 and F-707. \u00a0These will now additionally tie the rib pictured here. \u00a0I &hellip; <a href=\"http:\/\/jasonbeaver.com\/rv7\/2010\/03\/13\/match-drilled-ahrs-mount-kit\/\" class=\"excerpt-link\">Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[],"class_list":["post-1028","post","type-post","status-publish","format-standard","hentry","category-fuselage"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1028","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=1028"}],"version-history":[{"count":3,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1028\/revisions"}],"predecessor-version":[{"id":3832,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1028\/revisions\/3832"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=1028"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=1028"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=1028"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}