{"id":1022,"date":"2010-03-20T17:14:48","date_gmt":"2010-03-20T17:14:48","guid":{"rendered":""},"modified":"2017-12-14T04:40:00","modified_gmt":"2017-12-14T04:40:00","slug":"installed-flaps-temporarily","status":"publish","type":"post","link":"http:\/\/jasonbeaver.com\/rv7\/2010\/03\/20\/installed-flaps-temporarily\/","title":{"rendered":"Installed Flaps Temporarily"},"content":{"rendered":"

The aft flap cover needs a bracket fabricated to attach it to the floor.<\/p>\n

<\/a><\/center>The top of the front flap cover needs this little bracket fabricated to tie the cover to the F-705 upper channel. \u00a0I’m really glad I have a bending brake; it made bending this just trivial.<\/p>\n

<\/a><\/center>The lower end of the front cover needs this attach points riveted.<\/p>\n

<\/a><\/center>The front cover also needs a series of nutplates installed down both sides. \u00a0These will be used to attach the flap side covers.<\/p>\n

<\/a><\/center>I primed and riveted the upper motor mount reinforcing plate to the forward flap cover channel.<\/p>\n

<\/a><\/center>I also riveted the lower attach bracket to the aft cover channel.<\/p>\n

<\/a><\/center>Here is the plate that I bent on the bending brake earlier. \u00a0It’s riveted to forward flap cover and gets a couple of one-leg nutplates for attaching it to the upper F-705 channel.<\/p>\n

<\/a><\/center>I installed the forward flap channel into the plane and temporarily bolted the flap motor push rod to the weldment. \u00a0I couldn’t help running the motor up and down a bit to watch it work.<\/p>\n

<\/a><\/center>After ensuring the inner bolt support was properly aligned, I match drilled it to the channel. \u00a0It’s almost 2 a.m., so this is a good stopping point.<\/p>\n

<\/a><\/center><\/p>\n","protected":false},"excerpt":{"rendered":"

The aft flap cover needs a bracket fabricated to attach it to the floor. The top of the front flap cover needs this little bracket fabricated to tie the cover to the F-705 upper channel. \u00a0I’m really glad I have a bending brake; it made bending this just trivial. The lower end of the front … Read More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[],"class_list":["post-1022","post","type-post","status-publish","format-standard","hentry","category-fuselage"],"_links":{"self":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1022","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/comments?post=1022"}],"version-history":[{"count":3,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1022\/revisions"}],"predecessor-version":[{"id":3748,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/posts\/1022\/revisions\/3748"}],"wp:attachment":[{"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/media?parent=1022"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/categories?post=1022"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/jasonbeaver.com\/rv7\/wp-json\/wp\/v2\/tags?post=1022"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}